In the PS Remote Play error 0x8801330f, cause you can’t find a solution to fix the error? This article will tell you what to do if you have issues with PS4 Remote Play on iOS or Android.

The PS4 Remote Play app comes from the developer PlayStation Mobile Inc. and is usually responsible for troubleshooting. But not all issues encountered with PS4 Remote Play are due to developer errors.

What To Do With PS Remote Play Error 0x8801330f?

After updating the operating system or updating PS4 Remote Play, these changes can cause problems.

Therefore, it is always a sensible first step to reset your smartphone or tablet hard. After the reboot, the items are reloaded, and some errors disappear.

How To Fix Ps Remote Play Error 0x8801330f

Error code 0x8801330f (Cannot connect to PS4) appears when users try to secure their PS4 via Remote Play in Windows 10. The error code is displayed after the error connection attempt fails.

Third-Party Interference – One of the most common causes of this problem is an overly cautious antivirus or firewall that ends up breaking the connection between the PS4 (probably due to a false alarm). If this scenario applies, you should be able to fix the problem by disabling or completely uninstalling the overprotective security suite.

Auto-connect fails – Remote auto-connect is faster but less likely to work without problems. In this case, you should be able to fix the problem by manually connecting to the PS4 after making a few changes to your console settings.

UPnP is disabled – If you are using a newer model and have previously disabled UPnP, there is a possibility that the connection will fail because the necessary ports are closed. In this case, the easiest solution is to go into your router settings and re-enable UPnP (this should be enabled by default).

Ports used by Remote Play are not forward. If you are using an older model of router or are not a fan of UPnP but suspect that the problem is due to ports not being submit, you should be able to fix the problem by manually forwarding the Remote Play required. 3 ports (UDP 9296, UDP 9297 and UDP 9303).

Is Your Console Set Up For Remote Play?

ps remote play error 0x8801330f console set up

Be sure to:

Your console is on or in sleep mode.

Remote Play is enable.

System software is up to date.

Check Your Console’s Network Connection

The minimum connection speed required for Remote Play is 5 Mbps for both upload and download. Follow the steps below to verify that your connection meets these requirements.

PS5 Console: Go to Settings > Network > Connection Status, then select Test Internet Connection.

PS4 Console: Go to Settings > Network and select Test Internet Connection.

Reinstall The PS Remote Play App On Your Device

Please uninstall the PS Remote Play app by following the instructions below, and then reinstall the app.

Common Ps Remote Play Issues

PS Remote Play always fails

PS Remote Play cannot be open

P S Remote Play causes errors

PS Remote Play is not a problem

[PS Remote Play is not a matter of course]

[very slowly PS Remote Play loads]

[PS Remote Play without internet connection]

[Play sign in not working PS Remote Play]

[PS Remote Play Reduce battery consumption]

[smoothly PS Remote Play]

[PS Remote Play is not responding]

Does Antivirus Software Block Remote Play?

Your device’s antivirus software may be blocking Remote Play. Try disabling your antivirus software’s firewall settings or add the Remote Play application to the firewall program’s exceptions. See the instructions of the antivirus software for more details.

Blank Screen On PC When Setting Up PS Remote Play?

You may need to install the latest graphics driver. Contact your graphics card manufacturer for the latest drivers and installation instructions.

PS4 Remote Play: Error 0x80001fff

The 0x80001fff error we encounter is widest and highly Google, as it is most commonly seen in the PS4 Remote Play software. However, we also check that the official Sony PlayStation support site has tips and guides for all kinds of errors other than this one. No more talking; the first thing to fix this error is to go to your modem or router settings page and disable the firewall and DMZ altogether. The steps to disable the firewall and DMZ vary depending on your router model and are not explain. If after several attempts you are unsuccessful, get the manual for your modem or router on the Internet and continue;

After disabling the firewall and DMZ for your connection, restart your computer and PS4 and try relaunching the Remote Play PS4 software. If the problem persists and you get error messages like “Cannot find PS4” or “Cannot connect to PS4” or error 0x80001fff, please set a static IP on your PS4. To do this, open PS4 and go to settings. At this point, go to Network > Configure network connection > Use WiFi or LAN depending on the type of connection used > Customize and configure the following parameters:


Netmask =

Gateway = 192.168. 1.1

Primary DNS =

Secondary DNS = leave as is

Now check the network connection on the PS4 and if everything is okay, try to connect again via Remote Play. If that doesn’t work, let’s


We have reached the point where we believe it will 100% solve the problem. Go to your router and open the following ports: UDP 9296, UDP 9297, UDP 9303. Now restart your PC and console and try to connect via Remote Play again. The issue should be resolve as there is no longer a block between your PS4 and the internet connection. If that doesn’t work, we recommend uninstalling and reinstalling Remote Play on your computer.